To make your purchase simply peruse the list of available options for this radio below. Click in the tick box alongside the option if you wish to add it to your order.

Then click on the "Add to Basket" button at the foot of the page and this item plus any of any options you have selected will be added automatically to your shopping cart.

You may now proceed to check-out / payment or you can continue shopping for further items to add to your order. If you are looking for a specific item remember to use the search box at top right of every page on this website.

• Frequency coverage
  • RX: 0.03 - 60.000 MHz *1, *2
  • TX:
    •   1.800 -   1.999 MHz
    •   3.500 -   3.999 MHz
    • 5.3305, 5.3465, 5.3665, 5.3715, 5.4035 MHz
    •   7.000 -   7.300 MHz
    • 10.100 - 10.150 MHz *2
    • 14.000 - 14.350 MHz *2
    • 18.068 - 18.168 MHz *2
    • 21.000 - 21.450 MHz *2
    • 24.890 - 24.990 MHz *2
    • 28.000 - 29.700 MHz *2
    • 50.000 - 54.000 MHz *2
  • *1=some freq. bands are not guaranteed. *2=Depending on version
• Mode: USB, LSB, CW, RTTY, PSK31, AM, FM
• Number of memory channels: 101 (99 regular, 2 scan edges)
• Antenna connector: SO-239x2 and phono [RCA;(50 ohms)]
• Usable temperature range: 0°C to +50°C; +32°F to +122°F
• Frequency stability: less than ±0.5 ppm (1 minute after power ON/0°C to +50°C; +32°F to +122°F)
• Frequency resolution: 1Hz
• Power supply requirement: 13.8 V DC (±15% negative ground)
• Power consumption:
  • TX max power 23A
  • RX standby 3.0A (typ.)
  • RX max audio 3.5A (typ.)
• Dimensions (projections not included): 340(W) x 116(H) x 280(D) mm; 13.37(W) x 4.5(H) x 11.2(D) inches
• Weight: 10 kg; 25 lb.
• ACC 1 connector: 8-pin DIN connector
• ACC 2 connector: 7-pin DIN connector
• CI-V connector: 2-conductor 3.5 (d) mm (1/8")
• Display: 5.8 inch (diagonal) TFT color LCD

• Output power (continually adjustable):
  • SSB/CW/RTTY/PSK31/FM: 2 - 100 Watts
  • AM: 1 - 30 Watts
• Modulation system:
  • SSB: PSN modulation
  • AM: Low power modulation
  • FM: Phase modulation
• Spurious emissions: -50 dB (HF bands), -60 dB (50 MHz band)
• Carrier suppression: 40 dB
• Unwanted sideband suppression: 55 dB
• delta TX variable range: ±9.999 kHz
• Microphone connector: 8-pin connector (600 ohms)
• ELE-KEY connector: 3-conductor 6.35 (d) mm (1/4")
• KEY connector: 3-conductor 6.35 (d) mm (1/4")
• SEND connector: Phono (RCA)
• ALC connector: Phono (RCA)

• Receive system: Double conversion superheterodyne
• Intermediate frequencies:
  • 1st: 64.455 MHz
  • 2nd: 455 kHz
• Squelch sensitivity (Pre-amp ON):
  • SSB: Less than 3.2 µV
  • FM: Less than 0.3 µV
• Selectivity (representative value, filter shape at SHARP):
  • SSB (BW: 2.4 kHz): More than 2.4 kHz/-6 dB, Less than 2.8 kHz/-60 dB
  • CW (BW: 500 Hz): More than 500 Hz/-6 dB, Less than 700 Hz/-60 dB
  • RTTY (BW: 350 Hz): More than 350 Hz/-6 dB, Less than 650 Hz/-60 dB
  • AM (BW: 6 kHz): More than 6.0 kHz/-6 dB, Less than 15.0 kHz/-60 dB
  • FM (BW: 15 kHz): More than 12.0 kHz/-6 dB, Less than 20.0 kHz/-60 dB
• Spurious and image rejection ratio: More than 70 dB (except IF through on 50 MHz band)
• AF output power (at 13.8 V DC): More than 2.0 W at 10% distortion with an 8 ohm load
• RIT variable range: ±9.999 kHz
• PHONES connector: 2-pin connector 6.35 (d) mm (1/4")
• EXT SP connector: 2-pin connector 3.5 (d) mm (1/4")/8 ohms

   

• Matching impedance range:
  • 16.7 - 150 ohms unbalanced *1 (HF bands)
  • 20 - 125 ohms unbalanced *2 (50 MHz band)
  • *1=Less than VSWR 3:1; *2=Less than VSWR 2.5:1
• Minimum operating input power: 8 Watts
• Tuning accuracy: VSWR 1.5:1 or less
• Insertion loss: Less than 1.0 dB(after tuning)
• Specifications are preliminary are subject to change without notice or obligation.