To make your purchase simply peruse the list of available options for this radio below. Click in the tick box alongside the option if you wish to add it to your order.

Then click on the "Add to Basket" button at the foot of the page and this item plus any of any options you have selected will be added automatically to your shopping cart.

You may now proceed to check-out / payment or you can continue shopping for further items to add to your order. If you are looking for a specific item remember to use the search box at top right of every page on this website.

• Frequency Coverage:
  • Receive:

  0.030 - 199.999 MHz^*, 400 - 470 MHz^*

  • Transmit:

  1.8 - 1.999 MHz^*

  3.5 - 3.999 MHz^*

  7.0 - 7.300 MHz^*

  10.1 - 10.150 MHz

  14.0 - 14.350 MHz

  18.068 - 18.168 MHz

  21.0 - 21.450 MHz

  24.89 - 24.990 MHz

  28.0 - 29.700 MHz

  50.0 - 54.000 MHz^*

  144.0 - 148.000 MHz^*

  430.0 - 450.000 MHz^*

  * Varies according to version

• Mode: USB, LSB, CW, RTTY (FSK), AM, FM, WFM (Rx only)
• Number of memory channels: 503 (495 regular, 6 scan edges, 2 call channels)
• Antenna connector: SO-239x2 (for HF/50 MHz and 144/430 MHz)/50 ohms
• Power supply requirement: 13.8 V ± 15% (negative ground)
• Frequency stability: Less than ± 0.5ppm(0 ^°C (+50^°C).
• Current drain: Transmit max. power 22 A; Receive standby 1.3 A, max. audio 1.6 A
• Dimensions (projections not included):
  • 167(W) X 58(H) X 200(D) mm
  • 6-9/16(W) X 2-9/32(H) X 7-3/32(D) in
• Weight: 2.3 kg (5.1 lb)
• CI-V connector: 2 conductor, 3.5 (d) mm (1/8")
• ACC connector: 13 pin

• Output power:

  	SSB/CW/RTTY/FM	AM
  HF/50 MHz	2 - 100 W	1 - 40 W
  144 MHz	2 - 50 W	2 - 20 W
  440 MHz	2 - 35 W	2 - 14 W

   
• Modulation system:

  SSB	Balanced modulation
  AM	Low level modulation
  FM	Variable reactance modulation

   
• Spurious emissions: Less than -50 dB (below 30 MHz) -60 dB (above 50 MHz) -60 dB)
• Carrier suppression: More than 50 dB
• Unwanted sideband: More than 50 dB
• Microphone connector: 8 pin modular jack (600 ohm KEY connector: 3-conductor 6.35 (d) mm (1/4")
• RTTY connector: 3-conductor 3.5 (d) mm (1/8")

• Receive system:
  • SSB/CW/AM/WFM: Double superheterodyne
  • FM: Triple superheterodyne
• Intermediate frequencies

  	1st	2nd	3rd
  SSB/CW/AM/FM	124.487 MHz	455 KHz	16.15 kHz
  WFM	134.732 MHz	10.700 MHz

   
• Receive sensitivity (preamp on, except 4-4.5 and 8-9 MHz)

  	SSB/CW 10 dB S/N	AM 10 dB S/N	FM 12 dB SINAD	WFM 12 dB SINAD
  0.5 - 1.8 MHz	-	4.0 µV	-	-
  1.8 - 28 MHz	0.15 µV	2.0 µV	-	-
  28 - 29.7 MHz	0.15 µV	2.0 µV	0.5 µV	-
  50 - 54 MHz	0.12 µV	1.0 µV	0.25 µV	-
  76 - 108 MHz	-	-	-	10.0 µV
  144/440 MHz band	0.11 µV	1.0 µV	0.18 µV	-

   
• Squelch Sensitivity (threshold)

  SSB	Less than 5.6 µV
  FM	Less than 0.3 µV

   
• Selectivity (normal setting)

  SSB, CW, RTTY	More than 2.4 kHz/- 6 dB
  	Less than 4.8 kHz/ -60 dB
  AM/FM-N	More than 8.0 kHz/-6 dB
  	Less than 30 kHz/-36 dB
  FM	More than 12 kHz/-6 dB
  	Less than 30 kHz/-60 dB

   
• Spurious and image rejection ratio:
  • SSB/CW/AM - More than 70 dB
• Audio output power (at 13.8 V DC): More than 2.0 W at 10% distortion with an 8-ohm load
• RIT variable range +/-9.99 kHz
• PHONES connector: 3-conductor, 3.5 (d) mm (1/8")/8 ohms
• EXT SP connector: 2-conductor, 3.5 (d) mm (1/8")/8 ohms