radios.net.au shop - Icom 756 Pro 3 IC-756 Pro3 HF / VHF Radio (only available "used")

AVAILABLE FOR SALE HERE WE HAVE A MINT CONDX ICOM 756 PRO3 WITH ORIGINAL HAND MIC, PWR CABLE AND MANUAL (NO ORIGINAL BOX) - A 1 MONTH SELLER WARANTY IS APPLICABLE TO THIS PRODUCT.

PLEASE NOTE - THIS MODEL HAS NOW BEEN DISCONTINUED BY ICOM AND IS NO LONGER AVAILABLE BRAND NEW

The Icom IC-756 PROIII is an all mode HF and 6m transceiver. It has a 5" color TFT display, and features a high speed automatic antenna tuner, 32-bit digital signal processor, selectible bandpass filter shape, built-in CW and voice memory keyers, built-in RTTY demodulator with 8 RTTY TX memory channels, built-in high stabiltiy crystal oscillator, dual in-band RX, 101 memory channels, microphone compressor, RF speech compressor, spectrum scope display, SWR meter, microphone equalizer, triple band stacking registers, twin PBT, VOX, 100% duty cycle, 60m coverage, and more! The radio is supplied with a hand microphone with up and down frequency controls and a fused DC power cord.

band coverage 300 kHz-60 MHz
sensitivity .16 µV, typical
selectivity 15, 6, 2.4 kHz; 500 Hz
frequency stability < ±.5 PPM
power output 100 Watts
input voltage 13.8vDC @ 23 Amps
dimensions 4.4"H x 13.4"W x 11.2"D
weight 21 pounds

To make your purchase simply peruse the list of available options for this radio below. Click in the tick box alongside the option if you wish to add it to your order.

Then click on the "Add to Basket" button at the foot of the page and this item plus any of any options you have selected will be added automatically to your shopping cart.

You may now proceed to check-out / payment or you can continue shopping for further items to add to your order. If you are looking for a specific item remember to use the search box at top right of every page on this website.

756 ProIII Specifications

General

Frequency coverage
- RX: 0.03 - 60.000 MHz *1, *2
- TX:
  - 1.800 - 1.999 MHz
  - 3.500 - 3.999 MHz
  - 5.3305, 5.3465, 5.3665, 5.3715, 5.4035 MHz
  - 7.000 - 7.300 MHz
  - 10.100 - 10.150 MHz *2
  - 14.000 - 14.350 MHz *2
  - 18.068 - 18.168 MHz *2
  - 21.000 - 21.450 MHz *2
  - 24.890 - 24.990 MHz *2
  - 28.000 - 29.700 MHz *2
  - 50.000 - 54.000 MHz *2
- *1=some freq. bands are not guaranteed. *2=Depending on version
Mode: USB, LSB, CW, RTTY, AM, FM
Number of memory channels: 101 (99 regular, 2 scan edges)
Antenna connector: SO-239x2 and phono [RCA;(50 ohms)]
Usable temperature range: -10°C to +50°C; +14°F to +122°F
Frequency stability: less than ±0.5 ppm (1 minute after power ON/0°C to +50°C; +32°F to +122°F)
Frequency resolution: 1Hz
Power supply requirement: 13.8 V DC (±15% negative ground)
Power consumption:
- TX max power 23A
- RX standby 3.0A (typ.)
- RX max audio 3.5A (typ.)
Dimensions (projections not included): 340(W) x 111(H) x 285(D) mm; 13.37(W) x 4.37(H) x 11.22(D) inches
Weight: 9.6 kg; 21.2 lb.
ACC 1 connector: 8-pin DIN connector
ACC 2 connector: 7-pin DIN connector
CI-V connector: 2-conductor 3.5 (d) mm (1/8")
Display: 5-inch (diagonal) TFT color LCD

Transceiver

Output power (continually adjustable):
- SSB/CW/RTTY/FM: 5 -100 Watts
- AM: 5 - 40 Watts
Modulation system:
- SSB: PSN modulation
- AM: Low power modulation
- FM: Phase modulation
Spurious emissions: 50 dB (HF bands), 60 dB (50 MHz band)
Carrier suppression: 40 dB
Unwanted sideband suppression: 55 dB
delta TX variable range: ±9.999 kHz
Microphone connector: 8-pin connector (600 ohms)
ELE-KEY connector: 3-conductor 6.35 (d) mm (1/4")
KEY connector: 3-conductor 6.35 (d) mm (1/4")
SEND connector: Phono (RCA)
ALC connector: Phono (RCA)

Receiver

Receive system: Triple conversion superheterodyne
Intermediate frequencies:
- 1st: 64.455 MHz (for all modes)
- 2nd: 455 kHz (for all modes)
- 3rd: 36 kHz (for all modes)

Sensitivity (typical):

Frequency range (MHz)	SSB, CW, RTTY (at 2.4 kHz BW)	AM (at 6 kHz BW)	FM (at 15 kHz BW)
0.50-1.799	--	13 µV	--
1.80-27.99	0.16 µV *1	2 µV *1	--
28.0-29.99	0.16 µV *1	2 µV *1	0.5 µV *1
50.0-54.0	0.13 µV *2	1 µV	0.32 µV *2

10 db S/N for SSB, CW, RTTY and AM, 12 dB SINAD for FM
*1=pre-amp 1 is ON, *2=pre-amp 2 is ON

Squelch sensitivity (Pre-amp OFF):
- SSB, RTTY, CW: Less than 5.6 µV
- FM: Less than 1 µV
Selectivity (representative value):
- SSB, RTTY (BW: 2.4 kHz): More than 2.4 kHz/-6 dB (variable between 50 Hz and 3.6 kHz), Less than 2.8 kHz/-60 dB
- CW (BW: 500 Hz): More than 500 Hz/-6 dB (variable between 50 Hz and 3.6 kHz), Less than 700 Hz/-60 dB
- AM (BW: 6 kHz): More than 6.0 kHz/-6 dB, Less than 15.0 kHz/-60 dB
- FM (BW: 15 kHz): More than 12.0 kHz/-6 dB, Less than 20.0 kHz/-60 dB
Spurious and image rejection ratio: More than 70 dB (except IF through on 50 MHz band)
AF output power (at 13.8 V DC): More than 2.0 W at 10% distortion with an 8 ohm load
RIT variable range: ±9.999 kHz
PHONES connector: 2-pin connector 6.35 (d) mm (1/4")
EXT SP connector: 2-pin connector 3.5 (d) mm (1/4")/8 ohms
Specifications are subject to change without notice or obligation. UR

Antenna Tuner

Matching impedance range:
- 16.7 - 150 ohms unbalanced *1 (HF bands)
- 20 - 125 ohms unbalanced *2 (50 MHz band)
- *1=Less than VSWR 3:1; *2=Less than VSWR 2.5:1
Minimum operating input power: 8 Watts
Tuning accuracy: VSWR 1.5:1 or less
Insertion loss: Less than 1.0 dB(after tuning)