To make your purchase simply peruse the list of available options for this radio below. Click in the tick box alongside the option if you wish to add it to your order.

Then click on the "Add to Basket" button at the foot of the page and this item plus any of any options you have selected will be added automatically to your shopping cart.

You may now proceed to check-out / payment or you can continue shopping for further items to add to your order. If you are looking for a specific item remember to use the search box at top right of every page on this website.

• Frequency coverage
  • RX: 0.03 - 60.000 MHz *1
  • TX:
    •   1.800 -   1.999 MHz
    •   3.500 -   3.999 MHz
    •   5.3305, 5.3465, 5.3665, 5.3715, 5.4035 *2
    •   7.000 -   7.300 MHz
    • 10.100 - 10.150 MHz
    • 14.000 - 14.350 MHz
    • 18.068 - 18.168 MHz
    • 21.000 - 21.450 MHz
    • 24.890 - 24.990 MHz
    • 28.000 - 29.700 MHz
    • 50.000 - 54.000 MHz
  • *1 = Some frequency ranges are not guaranteed.
  • *2 = USA version only.
• Mode: USB, LSB, CW, RTTY, PSK31, AM, FM
• Number of memory channels: 101 (99 regular, 2 scan edges)
• Primary antenna connectors: SO-239 x4 (50 ohms)
• Usable temperature range: +32°F to +122°F (0°C to +50°C)
• Frequency stability: less than ±0.05 ppm (+32°F to +122°F, 0°C to +50°C )
• Frequency resolution: 1Hz
• Power supply requirement: 85-265 VAC
• Power consumption:
  • TX max power 800 VA
  • RX standby 200 VA (typical)
  • RX max audio 210 VA (typical)
• Dimensions (projections not included): 16 11/16 (W) x 5 1/2 (H) x 16 17/32 (D) inches (424x150x420 mm)
• Weight: 52.9 lb. (24 kg)
• Display: 7-inch (diagonal) TFT color LCD

• Output power (continually adjustable):
  • SSB/CW/RTTY/FM: 5 - 200 W
  • AM: 5 - 50 W
• Modulation system:
  • SSB: DPSN modulation
  • AM: Low power modulation
  • FM: Phase modulation
• Spurious emissions: Less than -60 dB
• Carrier suppression: More than 60 dB
• Unwanted sideband suppression: More than 80 dB
• Microphone connector: 8-pin connector (600 ohms)

• Receive system: Double conversion superheterodyne
• Intermediate frequencies:
  • 1st: 64.455 MHz (for all modes)
  • 2nd: 36 kHz (for all modes)
• Sensitivity (typical):
  

  Frequency range (MHz)	SSB, CW, RTTY (at 2.4 kHz BW)	AM (at 6 kHz BW)	FM (at 15 kHz BW)
  0.1-1.79	0.5 µV *1	13 µV	--
  1.80-28.0	0.16 µV *1	2 µV *1	--
  28.0-29.99	0.16 µV *1	2 µV *1	0.5 µV *1
  50.0-54.0	0.13 µV *2	1 µV	0.32 µV *2

  
  10 db S/N for SSB, CW, RTTY and AM, 12 dB SINAD for FM
  *1=pre-amp 1 is ON, *2=pre-amp 2 is ON
• Squelch sensitivity (Pre-amp OFF):
  • SSB, RTTY, CW: Less than 5.6 µV
  • FM: Less than 1 µV
• Selectivity (representative value):
  • SSB, RTTY (BW: 2.4 kHz): More than 2.4 kHz/-6 dB (variable between 50 Hz and 3.6 kHz), Less than 3.6 kHz/-60 dB
  • CW (BW: 500 Hz): More than 500 Hz/-6 dB (variable between 50 Hz and 3.6 kHz), Less than 700 Hz/-60 dB
  • AM (BW: 6 kHz): More than 6.0 kHz/-6 dB, Less than 15.0 kHz/-60 dB
  • FM (BW: 15 kHz): More than 15.0 kHz/-6 dB, Less than 20.0 kHz/-60 dB
• Spurious and image rejection ratio: More than 70 dB (except IF through on 50 MHz band)
• AF output power (at 13.8 V DC): More than 2.6 W at 10% distortion with an 8 ohm load
• RIT variable range: ±9.999 kHz
• PHONES connector: 3 conductor 1/4 inch (6.35 mm)
• EXT SP connector: 2 conductor 1/8 inch (3.5 mm)
• Specifications are subject to change without notice or obligation.            UR

   

• Matching impedance range:
  • 16.7 - 150 ohms unbalanced *1 (HF bands)
  • 20 - 125 ohms unbalanced *2 (50 MHz band)
  • *1=Less than VSWR 3:1; *2=Less than VSWR 2.5:1
• Minimum operating input power: 8 Watts
• Tuning accuracy: VSWR 1.5:1 or less
• Insertion loss: Less than 1.0 dB (after tuning)